notes/brother.md

@@ -69,17 +69,3 @@ bash linux-brprinter-installer-*.*.*-* DCP-L2520DW
    - **For Network Users**: Choose `Y` (Yes) and provide the DeviceURI number
 
    The installation process may take some time. Wait until it completes.
-
-**Optional**
-
-If the automatic installer does not work, it is possible to manually set the printer to a fixed IP address with the following commands:
-
-```bash
-# For models compatible with brsaneconfig4
-brsaneconfig4 -a name=DCP-L2520DW model=DCP-L2520DW ip=192.168.1.100
-
-# For models compatible with brsaneconfig3
-brsaneconfig3 -a name=MFC-9010CN model=MFC-9010CN ip=192.168.1.100
-```
-
-**Note**: Use brsaneconfig4 or brsaneconfig3 depending on the model of your Brother printer/scanner. Refer to the documentation to determine compatibility.

setups/debian_setup_aptly.md

@@ -63,11 +63,10 @@ Replace the placeholders below with the appropriate values for your setup:
 - **Server Configuration**
 
   - Server IP address: `<server-ip-address>` (e.g., 192.168.1.100)
-  - Hostname - Intranet: `<hostname-intranet>` (e.g., aptly-server.domain.com)
+  - Hostname - Intranet: `<hostname-intranet>` (e.g., aptly-server)
   - Hostname - Internet: `<hostname-internet>` (e.g., aptly.domain.com)
-  - Hostname - Hypervisor: `<hostname-hypervisor>` (e.g., proxmox-hypervisor.domain.com)
-  - Hostname - Hypervisor NAS: `<hostname-hypervisor-nas>` (e.g., nas-server.domain.com)
-  - Name - Hypervisor NAS: `<name-hypervisor-nas>` (e.g., nas-server)
+  - Hostname - Hypervisor: `<hostname-hypervisor>` (e.g., proxmox-hypervisor)
+  - Hostname - Hypervisor NAS: `<hostname-hypervisor-nas>` (e.g., nas-server)
 
 - **SSH Keys**
 
@@ -140,13 +139,13 @@ ssh <username>@<hostname-hypervisor-nas> "ls /mnt/proxmox/template/cache/"
 **Create the container**
 
 ```bash
-ssh <username-hypervisor>@<hostname-hypervisor> "pct create 100 <name-hypervisor-nas>:vztmpl/debian-12-upgraded_12.5_amd64.tar.zst --hostname <hostname-intranet> --cores 2 --memory 2048 --swap 2048 --net0 name=net0,bridge=vmbr0,ip=dhcp,firewall=1 --rootfs <name-hypervisor-nas>:250 --unprivileged 1 --features nesting=1 --ssh-public-keys <ssh-key-proxmox> --start 1"
+ssh <username-hypervisor>@<hostname-hypervisor> "pct create 100 stor2:vztmpl/debian-12-upgraded_12.5_amd64.tar.zst --hostname <hostname-intranet> --cores 2 --memory 2048 --swap 2048 --net0 name=net0,bridge=vmbr0,ip=dhcp,firewall=1 --rootfs stor2:250 --unprivileged 1 --features nesting=1 --ssh-public-keys <ssh-key-proxmox> --start 1"
 ```
 
 **Backup**
 
 ```bash
-ssh <username-hypervisor>@<hostname-hypervisor> "vzdump 100 --compress zstd --mode stop --storage <name-hypervisor-nas> --note \"$(date +'%Y-%m-%d %H:%M') Backup fresh install\""
+ssh <username-hypervisor>@<hostname-hypervisor> "vzdump 100 --compress zstd --mode stop --storage stor2 --note \"$(date +'%Y-%m-%d %H:%M') Backup fresh install\""
 ```
 
 **Set the state of the Proxmox HA Manager for Container 100**
@@ -220,7 +219,7 @@ chown -R aptly:aptly /home/aptly/.ssh/
 2. **Backup before starting**
 
    ```bash
-   ssh <username-hypervisor>@<hostname-hypervisor> "vzdump 100 --compress zstd --mode stop --storage <name-hypervisor-nas> --note \"$(date +'%Y-%m-%d %H:%M') Backup fresh install\""
+   ssh <username-hypervisor>@<hostname-hypervisor> "vzdump 100 --compress zstd --mode stop --storage stor2 --note \"$(date +'%Y-%m-%d %H:%M') Backup fresh install\""
    ```
 
 3. **Install Required Dependencies**
@@ -624,7 +623,7 @@ chown -R aptly:aptly /home/aptly/.ssh/
 
     ```bash
     ssh <username-hypervisor>@<hostname-hypervisor> "ha-manager set ct:100 --state stopped"
-    ssh <username-hypervisor>@<hostname-hypervisor> "vzdump 100 --compress zstd --mode stop --storage <name-hypervisor-nas> --note \"$(date +'%Y-%m-%d %H:%M') Backup post installation\""
+    ssh <username-hypervisor>@<hostname-hypervisor> "vzdump 100 --compress zstd --mode stop --storage stor2 --note \"$(date +'%Y-%m-%d %H:%M') Backup post installation\""
     ```
 
 15. **Start the server**

setups/debian_setup_gitea.md

@@ -58,11 +58,10 @@ Replace the placeholders below with the appropriate values for your setup:
 - **Server Configuration**
 
   - Server IP address: `<server-ip-address>` (e.g., 192.168.1.100)
-  - Hostname - Intranet: `<hostname-intranet>` (e.g., gitea-server.domain.com)
+  - Hostname - Intranet: `<hostname-intranet>` (e.g., gitea-server)
   - Hostname - Internet: `<hostname-internet>` (e.g., gitea.domain.com)
-  - Hostname - Hypervisor: `<hostname-hypervisor>` (e.g., proxmox-hypervisor.domain.com)
-  - Hostname - Hypervisor NAS: `<hostname-hypervisor-nas>` (e.g., nas-server.domain.com)
-  - Name - Hypervisor NAS: `<name-hypervisor-nas>` (e.g., nas-server)
+  - Hostname - Hypervisor: `<hostname-hypervisor>` (e.g., proxmox-hypervisor)
+  - Hostname - Hypervisor NAS: `<hostname-hypervisor-nas>` (e.g., nas-server)
 
 - **SSH Keys**
 
@@ -126,13 +125,13 @@ ssh <username>@<hostname-hypervisor-nas> "ls /mnt/proxmox/template/cache/"
 **Create the container**
 
 ```bash
-ssh <username-hypervisor>@<hostname-hypervisor> "pct create 100 <name-hypervisor-nas>:vztmpl/debian-12-upgraded_12.5_amd64.tar.zst --hostname <hostname-intranet> --cores 2 --memory 2048 --swap 2048 --net0 name=net0,bridge=vmbr0,ip=dhcp,firewall=1 --rootfs <name-hypervisor-nas>:250 --unprivileged 1 --features nesting=1 --ssh-public-keys <ssh-key-proxmox> --start 1"
+ssh <username-hypervisor>@<hostname-hypervisor> "pct create 100 stor2:vztmpl/debian-12-upgraded_12.5_amd64.tar.zst --hostname <hostname-intranet> --cores 2 --memory 2048 --swap 2048 --net0 name=net0,bridge=vmbr0,ip=dhcp,firewall=1 --rootfs stor2:250 --unprivileged 1 --features nesting=1 --ssh-public-keys <ssh-key-proxmox> --start 1"
 ```
 
 **Backup**
 
 ```bash
-ssh <username-hypervisor>@<hostname-hypervisor> "vzdump 100 --compress zstd --mode stop --storage <name-hypervisor-nas> --note \"$(date +'%Y-%m-%d %H:%M') Backup fresh install\""
+ssh <username-hypervisor>@<hostname-hypervisor> "vzdump 100 --compress zstd --mode stop --storage stor2 --note \"$(date +'%Y-%m-%d %H:%M') Backup fresh install\""
 ```
 
 **Set the state of the Proxmox HA Manager for Container 100**
@@ -208,7 +207,7 @@ cat /home/<username>/.ssh/<username>.pub >> /home/<username>/.ssh/authorized_key
 2. **Backup before starting**
 
    ```bash
-   ssh <username-hypervisor>@<hostname-hypervisor> "vzdump 100 --compress zstd --mode stop --storage <name-hypervisor-nas> --note \"$(date +'%Y-%m-%d %H:%M') Backup fresh install\""
+   ssh <username-hypervisor>@<hostname-hypervisor> "vzdump 100 --compress zstd --mode stop --storage stor2 --note \"$(date +'%Y-%m-%d %H:%M') Backup fresh install\""
    ```
 
 3. **Install Required Dependencies**
@@ -504,7 +503,7 @@ cat /home/<username>/.ssh/<username>.pub >> /home/<username>/.ssh/authorized_key
 
     ```bash
     ssh <username-hypervisor>@<hostname-hypervisor> "ha-manager set ct:100 --state stopped"
-    ssh <username-hypervisor>@<hostname-hypervisor> "vzdump 100 --compress zstd --mode stop --storage <name-hypervisor-nas> --note \"$(date +'%Y-%m-%d %H:%M') Backup post installation\""
+    ssh <username-hypervisor>@<hostname-hypervisor> "vzdump 100 --compress zstd --mode stop --storage stor2 --note \"$(date +'%Y-%m-%d %H:%M') Backup post installation\""
     ```
 
 20. **Start the server**